Say goodbye to "noise pollution": Greenwall sound-absorbing panels, giving every space the "right to be quiet"

The wood strip sound-absorbing panel is a type of wooden sound-absorbing panel, consisting of a decorative surface, core material and sound-absorbing thin felt. The surface has a strip-shaped texture and combines both decorative and sound-absorbing properties. 12

Structure and Specifications: The core material is usually a 16-18mm thick high-density board (such as MDF), the decorative surface can be coated with wood veneer, melamine layer or painted, and a black sound-absorbing thin felt is pasted on the back; the standard size is generally 2440mm in length and 128mm in width, with extremely small tolerances allowed. 12.

Sound absorption Principle: The surface is densely covered with small holes or slots, when sound waves enter, they repeatedly reflect on the inner walls, consuming energy and converting it into heat energy to achieve sound insulation; it has significant sound absorption effects on mid and high-frequency sound waves (especially above 600Hz).

Performance Characteristics:

• Light in weight, high in strength, not deformed, aesthetically pleasing and with strong three-dimensional sense.
• Good environmental performance, low formaldehyde content, in line with national environmental protection standards; some products can reach B1-level fire resistance rating.
• Excellent sound absorption rate, especially suitable for controlling mid and high-frequency noise.

Installation Method: Standardized module design, using a keel structure or adhesive method; the wall surface needs to be flat and dry, and attention should be paid to leaving gaps and horizontal lines during installation.

Application Scenarios: Widely used in studios, recording rooms, meeting rooms, hotels, hospitals, schools and other places with high requirements for acoustic environment.